Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Operation 2-27
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
c-ch2 Operation.doc
Last Saved On:
7/12/00 10:51 AM
Assume that you want to load the cartridge that is in Slot 4 into any available
drive. Use the
button to scroll line two to Slot 4. Afterwards, the following
screen appears:
From:
Slot4
To:
*DLT0
When you scrolled to your desired source, press the
Enter
button to select it.
Notice the two changes that occurred in the display.
1. The * reappears at the beginning of line 2, indicating that you have
made a selection.
2. The
now moves to line 4, indicating that you can now select a
destination.
From:
*Slot4
To:
*DLT0
You can now press the
Enter
button to select DLT0 as the destination. Note
that there is no
at the end of line 4, nor at the end of line 1. There are no
additional choices because you have selected a slot as the source, so the
destination must be a drive or the DLT1 already has a cartridge in it, so it
cannot be a valid destination.
Press the
Enter
button to select DLT0. In response, the Confirmation screen
appears:
From: Slot4 To:DLT0
ENTER To Execute
ESCAPE To Cancel
As the Confirmation screen indicates, to execute the load or unload, press the
Enter
button. If the Confirmation screen does not show your intended source
and destination, press the
Escape
button to return to the From entry screen.