Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

2-26 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide

Compaq Confidential – Need to Know Required

Writer:

Bob Young

Project:

Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide

Comments:

Part Number:

127510-002

File Name:

c-ch2 Operation.doc

Last Saved On:

7/12/00 10:51 AM

Notice that the is next to line 2 of the display. Line 2 shows the top item in

a scrollable list of sources. Note that a

has appeared on the right of the

bottom line. This indicates that the

button can now be used to scroll through

the list, and that the top item on the list appears. When you press the

button,

three things happen:

The list scrolls down one item (only line 2 scrolls).

appears on the right of line 1 of the display. This indicates that

there is one or more items above the item displayed on line 2.

The * at the left of line 2 disappears. This is because the * indicates the

current selection or the default selection, and that you have scrolled the

default selection off of the screen, and haven’t yet selected an item from

the list.

NOTE:

The contents of the lists on line 2 and line 4 will vary as follows:

Initial Screen (From Line)

The list on line 2 (From line) includes every drive and every magazine slot

(including mail slots) that has a cartridge in it (you can’t get a cartridge from a

slot or drive that is empty).

From:

DLT1

To:

*Slot3

Initial Screen (To Line)

The list on line 4 (To line) includes all of the valid destination choices, that is,

drives and slots that are empty (you can’t put a cartridge into a slot or drive

which already has one in it).

Scroll List (To Line)

There is another limitation on the To list. If you selected a drive on the From

screen, the To list can include only slots. If you selected a slot on the From

screen, the To list can contain only drives.