Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Operation 2-25

Compaq Confidential – Need to Know Required

Writer:

Bob Young

Project:

Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide

Comments:

Part Number:

127510-002

File Name:

c-ch2 Operation.doc

Last Saved On:

7/12/00 10:51 AM

Displaying Error Logs

To display the error history of the module, you need to use the Show History

menu. Access this menu as follows:

Fault Code: XXXX

Error Description

DD/MMM/YYYY HH:MM:SS

Entry NNNN Of NNNN

Loading and Unloading Tapes

The Load/Unload menus let you specify a source and a destination for a

cartridge movement. As a result, you use exactly the same procedure to load

and unload. To load or unload a tape from the front panel of the module, use

the Load/Unload menus.

The following Default screen appears. From this screen, enter Menu Mode by

pressing the

Enter

button.

READY

Modules 012345_

_ _ _ _ _ _ _ _ 9

_ _ _ _ _ 16

Afterwards, the Main menu appears:

Load/Unload

Show Status Menu

Maintenance Menu

Configure Menu

The is next to the line that reads Load/Unload. Press the

Enter

button to

display the first Load/Unload submenu, which is shown below:

From:

DLT1

To:

*Slot3