Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Operation 2-15
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
c-ch2 Operation.doc
Last Saved On:
7/12/00 10:51 AM
■
Hard error
■
In flux
■
Fault
The third line in a MiniLibrary Base Module tells the status of the library
robotics (loader) within the MiniLibrary Base Module. The possible conditions
of the library robotics are:
■
Idle
■
Fetch/stow
■
Taking inventory
■
Checking drives
■
Scanning labels
■
Orphaned cartridge
■
Trapped cartridge
■
Elevator home
The fourth line in a Base Module is the magazine map. Numbers 16-25
represent the map numbers of the cartridge slots. In this case, a 10-slot
magazine is in the first position below the 16-slot Expansion Unit. These
numbers vary with the position of the module within the system and magazine
size. If no magazine is installed, line 4 indicates “No Magazine.” The boxes
present on this line indicate that a cartridge is present in the corresponding slot
of the magazine. An underline means that there is no cartridge present in that
slot.
Selecting Control Panel Display Modes
As previously described, the POST, Initialization and Default screens appear
without operator or host intervention. The Fault screens appear whenever a
fault occurs. The screens that follow appear in response to operator actions.