Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Operation 2-13

Compaq Confidential – Need to Know Required

Writer:

Bob Young

Project:

Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide

Comments:

Part Number:

127510-002

File Name:

c-ch2 Operation.doc

Last Saved On:

7/12/00 10:51 AM

Initialization Screens

After POST completes, the library robotics system is initialized. A series of

screens similar to the following appears during this process:

COMPAQ TL89x

Firmware Level 0X.xx

Initializing Loader

26-Feb-19xx 15:35:59

Default Screen

After the POST diagnostics have concluded successfully and initialization is

complete, the system Default screen appears:

READY

Modules:0_ _ _ _ _ _

_ _ _ _ _ _ _ _ 9

_ _ _ _ 15

The numbers on the second line correspond to the Base Modules that are

connected to the system. Up to five Base Modules can be connected. The third

and fourth lines represent the cartridge magazine in the Expansion Unit. A

rectangle appears in each position that contains a cartridge. An underline

represents an empty slot.

Fault Screen

When a fault is detected within the Expansion Unit or the Pass-Through

Mechanism (PTM), a screen similar to the following appears:

Fault Code: XXXX

Error Description

ERP line 1

ERP line 2

When a fault is detected in one of the Base Modules, the Alert LED on the

Expansion Unit control panel lights and the Fault screen appears on the

malfunctioning Base Module. At the same time, either the Drive Fault or the

Loader Fault LED lights on that module.