Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
l-appe Information on a Pass-Th.doc
Last Saved On:
7/12/00 11:46 AM
Appendix
E
Information on Pass-Through Section
Covers
Introduction
This appendix supplements the information presented in the section
“Mechanical Installation” of Chapter 3.
IMPORTANT:
These procedures should be performed by a qualified service technician.
Pass-Through Section Covers
The Pass-Through Mechanism (PTM) moves tape cartridges vertically
between the TL881/TL891 Family MiniLibrary System modules. Each module
section is covered by an individual sheet-metal enclosure. These covers protect
the mechanism during shipping and are an important safety shield during
operation.
A separate detachable side plate is part of the cover assembly. During
installation the side plates should be removed on any mechanism sections
located behind a MiniLibrary system module. This allows easy access to a
cartridge stranded in transit by a commercial power outage. The remaining
portion of the cover can also be removed from any section behind a module.