Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

D-6
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
k-appd Adding a Second Tape.doc
Last Saved On:
7/12/00 11:45 AM
4. Connect the power and interface cables at the rear of the module.
5. If the Base Module is a desktop model, replace the skin cover as
described in “Removing and Replacing the Skin Cover (Desktop Models
Only).”
SHR-1721
Figure D-3. Removing the cover plate
Removing and Replacing the Drive Caddy Assembly
The drive caddy assembly is an enclosure that holds one or two DLT drives
and the interconnecting cables. The assembly includes the SCSI interface
connectors and cables for the Base Module, the power cables for the drives,
and communication cables from the drives to the controller PWB.