Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

D-4
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
k-appd Adding a Second Tape.doc
Last Saved On:
7/12/00 11:45 AM
Removing and Replacing the Skin Cover (Desktop
Models Only)
The skin cover is held in place by two screws on each side of the Base Module
(Figure D-2).
SHR-1720
Figure D-2. Removing the skin cover
Removing
To remove the skin cover from the Base Module:
1. Remove the two screws on each side of the Base Module.
2. Grasp the cover at the lower edge of each side and then lift it straight up.
There are two notches on each side of the cover to help clear the
mounting brackets.