Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Adding a Second Tape Driv
D-3
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
k-appd Adding a Second Tape.doc
Last Saved On:
7/12/00 11:45 AM
Table D-1
Parts Location
continued
Figure Legend Description
:
AC power switch
;
Control panel
<
Unlock/Open
button and locked indicator
=
Magazine security lock
>
Leadscrew
Overall Procedure
NOTE:
If the Base Module is part of an expanded TL881/TL981 Family MiniLibrary
System, refer to the
Compaq StorageWorks TL881/TL890/TL891 Family MiniLibrary
System Maintenance and Service Guide
for information on removing the Base Module
from the MiniLibrary system.
To add a second drive to the Base Module:
1. Remove the skin cover, if present.
2. Remove the cover plate.
3. Remove the drive caddy assembly.
4. Install the new drive.
5. Replace the drive caddy assembly.
6. Replace the cover plate.
7. Replace the skin cover.