Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Diagnostics and Troubleshooting 6-21
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
g-ch6 Diagnostics and Troubleshooting.doc
Last Saved On:
7/12/00 11:32 AM
Using System Diagnostics
The system diagnostics are intended to be used by a CE or other technically
trained person. To use system diagnostics:
1. At the Default screen, press the
Enter
button. The following screen
appears:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
2. Press the
button twice to move the next to Maintenance, then press
the
Enter
button to select the Maintenance menu. A display similar to the
following appears:
Clean Drive
Diagnostic Menu
Demo Menu
Flash Update
3. Press the
Enter
button to select the Diagnostic menu. The following
screen appears:
Cartridge Cycle
Friction Test
Tach Feedback
Scanner Feedback
You can scroll through this screen. The list of diagnostics available is as
follows.
■
Cartridge Cycle
■
Friction Test
■
Tach Feedback
■
Scanner Feedback
Of these selections, only Cartridge Cycle is intended for use in the field. The
remaining tests are used during factory setup.