Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Diagnostics and Troubleshooting 6-19
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
g-ch6 Diagnostics and Troubleshooting.doc
Last Saved On:
7/12/00 11:32 AM
Table 6-8
Intermodule Error Codes (6xxx)
continued
FSC Message Description
6044 Invalid Com Blk Type A Slave inter-module process received a packet from
the Status/Message queue, but the packet’s
CommBlock type was invalid.
6045 Command Overlap A Slave inter-module process received a Command
from the Master inter-module process, but a
previously issued command is still being executed.
6046 No Pkts To Send A Slave inter-module process has been requested to
send a packet to the Master inter-module process,
but the Slave inter-module process has no packets
to send.
6047 Invalid Direction A Slave inter-module process has received a
direction control byte from the Master inter-module
process, but the direction control byte is invalid.
6048 Master Pkt ID Bad
6060 Slave 3 Ch Init Err An error occurred during the 3 Ch slave module
initialization.
6061 Slave 3 Ch Sync Err An error occurred attempting to sync with the 3 Ch
slave module.
6062 Slave 3 Ch Flash Err An error occurred attempting to flash the 3 Ch slave
module.
Table 6-9
Boot Error Codes (Bxxx)
FSC Message Description
B001 Boot ROM CRC Error
B002 Boot RAM Test Failed
B004 Boot Comm Open Error
B005 Boot Novram Error
B006 Boot Unused Int
B007 Flash Init Error
continued