Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Diagnostics and Troubleshooting 6-13
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
g-ch6 Diagnostics and Troubleshooting.doc
Last Saved On:
7/12/00 11:32 AM
Table 6-6
Power-On Error Codes (4xxx)
FSC Message Description
4001 ROM CRC Error
4002 Ram Test Failed You chose the Load/Unload menu selection, but no
DLT drives are currently attached to the MiniLibrary
system.
4003 Xilinx Progr Error You chose the Load/Unload menu selection, but all
drive and slot locations are currently devoid of tape
cartridges.
4010 Comm UART Error You chose the Load/Unload menu selection, but all
drive and slot locations are currently occupied with
tape cartridges.
4011 Trace UART Error You chose the Load/Unload menu, with no
magazine.
4012 Barcode UART Error You chose the Clean Drive menu selection, but no
DLT drives are currently attached to the MiniLibrary
system.
4013 DLT 0 UART Error You chose the Clean Drive menu selection, but all
slot locations are currently devoid of tape cartridges.
4014 DLT 1 UART Error
Table 6-7
Power-On Error Codes (5xxx)
FSC Message Description
5001 No DLTs Attached You chose the Load/Unload menu selection, but no
DLT drives are currently attached to the MiniLibrary
system.
5002 All DLTs/Slots Empty You chose the Load/Unload menu selection, but all
drive and slot locations are currently devoid of tape
cartridges.
5003 All DLTs/Slots Full You chose the Load/Unload menu selection, but all
drive and slot locations are currently occupied with
tape cartridges.
continued