Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Regular Maintenance 5-3
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
f-ch5 Regular Maintenance.doc
Last Saved On:
7/12/00 11:11 AM
Running the Cleaning Cartridge
This procedure assumes that the cleaning cartridge has been installed into Slot
0 of the magazine.
1. At the Default screen, press the
Enter
button. The following screen
appears:
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
2. Press the
button twice to move the next to Maintenance, then press
the
Enter
button to select the Maintenance menu. A screen similar to the
following appears:
Clean Drive
Diagnostic Menu
Demo Menu
Flash Update
3. Press the
Enter
button once to select Clean Drive. The following screen
appears:
Cleaning:
*DLT0
Using
*Slot0
4. Lines 2 and 4 are scrollable. The choices available on Line 2 are DLT0,
DLT1 and Both. Assume you want to clean DLT0. Press the
Enter
button once to accept DLT0. The
moves to line 4 of the display.
Press the
Enter
button again to use the cartridge in Slot 0. (If you cannot
to use slot 0 for the cleaning cartridge, scroll to line 4 to select another
slot.)
5. The following screen appears:
Clean: DLT0
Use: Slot0
ENTER To Execute
ESCAPE To Cancel
6. As the confirmation screen indicates, to execute the cleaning operation,
press the
Enter
button. If the confirmation screen does not show your
intended drive and cleaning cartridge, press the
Escape
button to return
to the Cleaning submenu.