Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

Configuration 4-13
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
e-ch4 Configuration.doc
Last Saved On:
7/12/00 11:09 AM
Table 4-2
MiniLibrary Special Configuration Options
continued
Set Special Configuration
Option
Settings Default
Set Special Configuration
Option
Settings Default
Door Open Response
(Expansion Unit )
Ready
Not Ready
Ready
SCSI Mode SCSI-2
SCSI-3
SCSI-2
Post Recv’d Error Disabled
Enabled
Disabled
Tape Alert Mode Logging Disabled
No exceptions
Unit Attention
Rec. Error (cnd)
Rec. Error (uncd)
No Sense
On Request
Logging Disabled
Set Time
This command lets you set the Base Module clock.
Set Baud Rate
This option lets you set the data transmission rate of the module trace port.
This function is intended for use by Customer Engineers (CEs) only. The
default is 38400 bits/sec.
Set Serial Number
This option lets you alter the Base Module serial number as stored in the unit.
The Base Module’s robotics reports these settings in response to the SCSI
INQUIRY command, in the unit serial number page.