Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

4-4 Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
e-ch4 Configuration.doc
Last Saved On:
7/12/00 11:09 AM
Descriptions of Configuration Options
The items available on the Configuration menu follow.
Set Data Format
This setting lets you:
1. Set the data format to Auto Selection, THZ01, THZ02, DLT2000,
DLT2000XT, DLT4000, DLT7000, or DLT8000.
2. Auto Select, enable, and disable data compression.
Compression cannot be enabled when either the THZ01 or THZ02 format is in
use. This setting applies to the next or currently loaded cartridge only. An
UNLOAD command returns to the default. This setting does not display the
current format of the loaded tape. Use the Show Status menu for this purpose.
The default for density and compression is Auto Selection.
Set SCSI
This option lets you:
1. Enable or disable the MiniLibrary system robotics SCSI bus parity
checking.
2. Set the SCSI addresses of the drives and the MiniLibrary system
robotics. The defaults are: parity on, DLT 0 address = 4,
DLT 1 address = 5, robotics address = 0.