Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide (July 2000)

3-34
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Compaq Confidential – Need to Know Required
Writer:
Bob Young
Project:
Compaq StorageWorks TL881/TL891 Family MiniLibrary System Reference Guide
Comments:
Part Number:
127510-002
File Name:
d-ch3 Installation.doc
Last Saved On:
7/12/00 11:24 AM
3. With the
next to line 1, press the Enter button. The moves to line 2
and
appears at the end of line 4. Now you can use the
and
buttons to scroll line 2 to display the possible settings. These options
enable you to specify which module should have the mail slot enabled.
Scroll downward to the desired module, then press the Enter button to
save the new selection.
NOTE:
The Expansion Unit is not on the list. Module 1 refers to the Base Module just
below it.
4. Scroll line 2 to display Module 1, then press the Enter button to select it.
The following screen changes as shown:
Mail Slot Emul:
*Module 1 Enabled
Mail Slot Count:
*10
5. The
returns to line 1. Press the button. The moves to line 3.
6. Press the Enter button. The
moves to line 4. Now you can use the
and buttons to scroll line 4 to specify how many slots will be
designated as mail slots. Scroll to the desired number, then press the
Enter button to save the new selection
7. Press the Escape button repeatedly to return to the Default screen.
Reserved Slots
Some host software imposes size limits on tape library magazines for licensing
purposes, and will not operate with a library that exceeds the licensed size.
This configuration option lets you withdraw some of the slots in the Expansion
Unit from use as storage slots in order to meet licensing requirements.
1. Move from the Default screen through the Main menu to the Configure
submenu.
2. Scroll down on the Configure submenu until you see Set Reserved Slots,
and then select that option. The following screen appears:
Reserved Slots:
*0