Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure (July 2000)

Adding a Second Drive

Compaq Confidential – Need to Know Required

Writer:

Bob Young

Project:

Compaq StorageWorks TL881/TL891 Family MiniLibrary System Drive Upgrade Procedure

Comments:

Part Number:

127511-002

File Name:

b-ch1 Adding a Second Drive.doc

Last Saved On:

7/12/00 7:16 PM

Table 1

Parts Location

continued

Figure Legend Description

AC power switch

;

Control panel

Unlock/Open

button and locked

indicator

Magazine security lock

Leadscrew

General Procedure

NOTE:

If the Base Module is part of an expanded TL881/TL891 Family MiniLibrary

System, refer to the

Compaq StorageWorks

TL881/TL890/TL891 Family MiniLibrary

System Maintenance and Service Guide

for information on removing the Base Module

from the MiniLibrary system.

To add a second drive to the Base Module:

1. Remove the skin cover, if present.

2. Remove the cover plate.

3. Remove the drive caddy assembly.

4. Install the new drive.

5. Replace the drive caddy assembly.

6. Replace the cover plate.

7. Replace the skin cover.