Adding the TL895 to the Enterprise Backup Solution

Installation and Configuration 27
Enterprise Backup Solution Compatibility
The serial numbers indicated below require TL895 revisions.
Table 3-4
Upgrade Requirements
Series Version: A01
DS-TL895-BA
A01
DS-TL895-H2
B01
DS-TL895-BA
C01
DS-TL895-BA
or
DS-TL895-H2
EBS Compatible
S/N Start 5J80500006 5J83400001 5J83400001 2G91CBB5T001
S/N End 5J83200010 5J90400005 5J90400005 2G91CBB5X014
Robotic FW
Version
N2.20 N2.30 N2.30 N2.31
Robotic FW
Upgrade Method
Tapelib Diag.
and N2.31
Tapelib Diag.
and N2.31
Tapelib Diag.
and N2.31
None Required
Tape Library S/N N/A N/A N/A 12 Digit
Upgrade Method EBS Label EBS Label EBS Label N/A
GUI FW Version 1.2 1.22 1.23 1.23
Upgrade Method Tapelib Diag.
and 1.23
Tapelib Diag.
and 1.23
None Required None Required
Drive FW Version V55 DGL V80 CPA-2 V80 CPA-2 V80 CPA-2
Upgrade Method FUP Tapes None Required None Required None Required
NOTE:
If your system is a Series A01 or B01, contact your Compaq Services
Representative for on-site revision information. Phone support may be accessed by
calling 1-800-OKCOMPAQ.
IMPORTANT: Only certified service representatives are qualified to implement these system
revisions.