Specifications

3. If it is necessary to replace the PC Card assembly, remove the PC Card assembly from the smart
card reader board by disengaging the hooks (1) on the PC Card assembly from the tabs on the
smart card reader board.
4. Remove the PC Card assembly (2) from the smart card reader board. The PC Card assembly is
available using spare part number 446437-001.
5. If it is necessary to replace the microphone and cable, disconnect the microphone cable (1) from
the system board.
6. Remove the microphone and cable (2). The microphone is available using spare part number
446432-001.
Reverse this procedure to install the smart card reader board, PC Card assembly, and microphone.
78 Chapter 4 Removal and replacement procedures