Installation guide

TARGA 3000 Configuration Cookbook
6 TARGA 3000 Technical Advisories
6.1 PCILOCK Boot Option
THIS ADVISORY APPLIES TO ALL CERTIFIED WORKSTATIONS WORKING UNDER NT4
Summary: Adding /PCILOCK switch to BOOT.INI allows Adobe Premiere to launch properly.
Note that this is required for Windows NT but should not be used under Windows 2000.
Procedure:
1. Log onto NT with administrative priveleges
2. Locate BOOT.INI. Create a copy in another location for backup
3. Disable Read-Only file attribute
4. Open or edit file in Notepad or Edit.
5. Copy the line for default OS (normally first option)Insert and paste copy in first position and append with
/PCILOCK switch.
After the procedure, the file should look similar to this:
[boot loader]
timeout=0
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows NT Workstation Version 4.00 TARGA 3000" /PCILOCK
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows NT Workstation Version 4.00"
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows NT Workstation Version 4.00 [VGA mode]" /basevideo
/sos
6. Save BOOT.INI and close
7. Enable Read-Only file attribute
8. Reboot system