F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 20

13XT-0401B-WWEN

e. The upgrade process is automatic and will take some time. Please be patient.

f. When the upgrade is complete, log on to the node as the administrator.

7. Install the latest Compaq drivers and server support software by running the Compaq

Support Paq for Windows 2000 on Node 1:

a. Insert the SmartStart CD and select “Start” and then “Run”. In the displayed

dialog box, type “X:\cpqsupsw\ntcsp\setup.exe” where “X” is the drive letter

associated with your CD-ROM drive.

Note: You can also acquire the latest Compaq Support Paq from the Compaq website

(http://www.compaq.com/support).

a. After the installation is completed, the Compaq Support Paq window will show

the drivers that were updated and the drivers that were not installed because a

current version of the driver exists on the node or because a lack of hardware on

the node.

Note: Allow time for Windows 2000 to find any new devices. If new devices are detected,

Windows will prompt you with a dialog box to reboot, select yes and reboot. This is necessary for

a successful migration.