Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 12
13XT-0401B-WWEN
7. If DNS is not already installed, set up the DNS client on Node 1:
a. Right-click “My Network Places” and click “Properties”.
b. Right-click on the network connection that the clients will use to connect to the
domain controller and click “Properties”.
c. The Properties screen displays the current options available for the selected
network card. Highlight “Internet Protocol (TCP/IP)”, and click “Properties”.
d. Select “Use the following DNS server address:”
e. In the “Preferred DNS address:” row, enter the Preferred DNS Server IP address.
f. Click the “Advanced” button.
g. Select the “DNS” tab.
h. In the “DNS server address, in order of use:” enter the DNS suffix.
i. Then click on the “OK” button.