F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 39

13XT-0401B-WWEN

b. Turn on Node 1 and run the System Configuration Utility by pressing “F10”

when prompted during boot.

c. Verify the configuration changes to the system (a host bus adapter was added).

d. Save configuration changes and reboot.

12. Add the Fibre Channel host bus adapter driver when the “Windows 2000 Found New

Hardware Wizard” appears.

a. Click Next on the “Found New Hardware Wizard” window

b. Select the “Search for suitable driver” option and click “Next”

c. Follow the onscreen instructions for selecting a file location and select the Fibre

Channel Host bus adapter driver for the adapter you are using.

d. Click “Finish” to complete driver installation.

13. Install Secure Path on Node 1.

a. Insert the Secure Path CD to automatically start the Secure Path installation

process. Alternatively, double-click the following file on the CD:

X:\SPInstall\setup.exe where X is the drive letter of your CD-ROM Drive.

b. During the installation, you are required to configure your clients.

c. Remove the Compaq SANworks Secure Path CD from the CD-ROM Drive.