F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 28

13XT-0401B-WWEN

6. Install Secure Path on Node 1.

a. Insert the Secure Path CD to automatically start the Secure Path installation

process. Alternatively, double-click the following file on the CD:

“X:\SPInstall\setup.exe” where “X” is the drive letter of your CD-ROM Drive.

b. During the installation, you are required to configure your clients.

c. Remove the Compaq SANworks Secure Path CD from the CD-ROM Drive.

d. Reboot the node when prompted.

Note: For more detailed information on Secure Path, refer to the Secure Path documentation.

7. Migrating Node 2 Cluster.

a. Upgrade Node 2 by repeating steps 1 though 6 for Node 2 and then continuing

with step 8.

8. Verify the cluster by running the Compaq Cluster Verification Utility.

a. Execute the startup.exe file located on the Compaq Cluster Verification Utility

CD.

b. Select the “Run Cluster Verification Utility” option.

c. Select the “Compaq ProLiant Cluster HA/F200” option.

d. Enter the first cluster computer name and click “add”