F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 27

13XT-0401B-WWEN

a. Shut down Node 1 and install the second host bus adapter, additional redundant

RA4000 Controller(s), the additional Fibre Channel storage hub or FC-AL switch

and cables as necessary.

IMPORTANT: To ensure that your HA/F200 cluster fails over properly, attach each host bus

adapter in a single server to a different Fibre Channel storage hub or FC-AL switch, and attach

each RA4000 Controller in the RA4000/4100 to a different Fibre Channel storage hub or FC-AL

switch.

IMPORTANT: If using the Compaq StorageWorks FC-AL Switch 8 be sure to properly set up

the Port LIP Propagation Policies correctly.

b. Power on Node 1 and run the System Configuration Utility by pressing “F10”

when prompted during boot.

c. Verify the configuration changes to the system (a host bus adapter was added).

d. Save the configuration changes and reboot.

5. Add the Fibre Channel host bus adapter driver when the “Windows 2000 Found New

Hardware” Wizard appears.

a. Click “Next” on the “Found New Hardware” Wizard window

b. Select the “Search for suitable driver” option and click “Next”

c. Follow the on screen instructions for selecting a file location and select the Fibre

Channel Host bus adapter driver for the adapter you are using.

d. Click “Finish” to complete driver installation.