F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 26

13XT-0401B-WWEN

d. Repeat b & c Steps until all Resource Groups listed in the Cluster Administrator

display have been moved to Node 2, called TEST2 in the sample screen shot.

Note: For help on moving cluster groups, refer to the Microsoft clustering documentation that

came with your operating system.

2. Install the latest Compaq drivers and server support software by running the Compaq

Support Paq for Windows 2000 on Node 1:

a. Insert the SmartStart CD and select Start and then Run. In the dialog box

that displays, type “X:\cpqsupsw\ntcsp\setup.exe” where “X” is the drive

letter associated with your CD-ROM drive.

Note: You can also acquire the latest Compaq Support Paq from the Compaq website

(http://www.compaq.com/support).

b. After the installation is completed, the Compaq Support Paq window will show,

the drivers that were updated and the drivers that were not installed due to a

current version of the driver on the node or due to a lack of hardware on the

node.

3. Install Windows 2000 Service Pack 1 on Node 1 and reboot when prompted.

4. Install new hardware: