Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 23
13XT-0401B-WWEN
11. Install Secure Path on Node 1.
a. Insert the Secure Path CD to automatically start the Secure Path installation
process. Alternatively, double-click the following file on the CD:
“X:\SPInstall\setup.exe” where “X” is the drive letter of your CD-ROM Drive.
b. During the installation, you are required to configure your clients.
c. Remove the Compaq SANworks Secure Path CD from the CD-ROM Drive.
d. Reboot the node when prompted.
Note: For more detailed information on Secure Path, refer to the Secure Path documentation.
12. Migration of Node 2 Cluster
a. Upgrade Node 2 by repeating steps 1 through 11 for Node 2 and then continuing
with Step 13.
13. Verify the cluster by running the Compaq Cluster Verification Utility.
a. Execute the startup.exe file located on the Compaq Cluster Verification Utility
CD.
b. Select the “Run Cluster Verification Utility” option.
c. Select the “Compaq ProLiant Cluster HA/F200” option.
d. Enter the first cluster computer name and click “add”
e. Enter the second cluster computer name and click “add”.
f. Click the “Finish” button for the Compaq Cluster Verification Utility to display
your Cluster configuration verification.
14. Verify that Secure Path is running properly and that the redundant paths are operational
by starting the Secure Path Manager Utility. See the Secure Path documentation for
details on running this program.