F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 21

13XT-0401B-WWEN

Note: After the Windows 2000 Advanced Server upgrade is complete the Cluster Service may

fail to start since the DNS client for Node 1 has not been set up. The problem that occurs is an

authentication error with the user account used to start the Cluster Service. The error message is

expected and will be resolved after the DNS client is set up.

8. If DNS is not already installed, set up the DNS client on Node 1:

a. Right-click “My Network Places” and click “Properties”.

b. Right-click on the network connection that the clients will use to connect to the

domain controller and click “Properties”.

c. The Properties screen displays the current options available for the selected

network card. Highlight “Internet Protocol (TCP/IP)”, and click “Properties”.

g. Select “Use the following DNS server address:”

h. In the “Preferred DNS address:” row, enter the Preferred DNS Server IP address.

i. Click the “Advanced” button.

j. Select the “DNS” tab.

k. In the “DNS server address, in order of use:” enter the DNS suffix.

l. Then click on the “OK” button.