F200

Upgrading Compaq ProLiant Clusters HA/F100 and HA/F200 16

13XT-0401B-WWEN

1. Migration of Node 1 Cluster

a. Move all of the cluster groups, including the cluster group, to Node 2 using the

Cluster Administrator Utility.

b. Open Cluster Administrator by clicking Start, Programs, Administrative Tools,

Cluster Administrator.

c. Referring to the screen shot below, right click on “Cluster Group” and select

“Move Group”.

d. Repeat steps b & c until all Resource Groups listed in the Cluster Administrator

display have been moved to Node 2, called TEST2 in the sample screen shot.

Note: For help on moving cluster groups, refer to the Microsoft clustering documentation that

came with your operating system.

2. Using Add/Remove Programs in the Control Panel, remove any cluster fixes that

may be installed on node 1.

3. Run the Compaq Windows 2000 Primer Utility to remove any conflicting device

drivers or applications that may cause problems during the install or operation of

Windows 2000 Advanced Server.

a. The Primer Utility only removes Compaq Utilities that are not

compatible with Windows 2000.