Specifications

Drive Positions

Figure 6-14 Drive Positions

Table 6-2 Drive Positions

1 Two 5.25-inch drive bays for optional drives (optical drives shown)

2 One 3.5-inch drive bay for optional drive (media card reader shown)

3 Secondary 3.5-inch internal hard drive bay for optional hard drive

4 Primary 3.5-inch internal hard drive bay

NOTE: The drive configuration on your computer may be different than the drive

configuration shown above.

NOTE: HP Compaq PRO 6300 models do not support RAID.

To verify the type and size of the storage devices installed in the computer, run Computer Setup.

Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay

CAUTION: All removable media should be taken out of a drive before removing the drive from the

computer.

1. Prepare the computer for disassembly (Preparation for Disassembly on page 56)

2. Remove the access panel (

Computer Access Panel on page 57)

3. Remove the front bezel (

Front Bezel on page 58)

Drives