Specifications

Description Spare part number
G465, 1.9 GHz, 1.5-MB L3 cache 706883-001
G460, 1.8 GHz, 1-MB L3 cache 682410-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 97).
2. Remove the access panel (
Access Panel on page 98).
3. Remove the fan duct (
Fan duct on page 123).
4. Remove the front fan assembly (
Front Fan Assembly on page 124).
5. Remove the heat sink (
Heat sink on page 130).
6. Rotate the locking lever to its full open position (1).
7. Raise and rotate the microprocessor retainer to its fully open position (2).
8. Carefully lift the processor from the socket (3).
CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and
handling them could cause irreparable damage. Once pins are damaged it may be necessary to
replace the system board.
The heat sink must be installed within 24 hours of installing the processor to prevent damage to
the processor’s solder connections.
Figure 7-36 Removing the processor
To install a new processor:
1. Place the processor in its socket and close the retainer. Make sure the slot in the processor fits into
the post on the socket.
Processor
133