User's Manual

Pointing Devices and Keyboard
When num lock mode on an external keypad is turned on, the
num lock light on the notebook turns on. When the num lock
mode on an external keypad is turned off, the num lock light on
the notebook turns off.
If the external keypad is connected, the internal keypad cannot
be turned on.
Enabling or Disabling Num Lock Mode as You Work
To turn num lock on or off on an external keypad as you work,
press the
num lk key on the external keypad, not on the notebook.
Enabling or Disabling Num Lock Mode at Startup
To set the notebook to start up with a connected external keypad
in num lock mode, set your preference in Computer Setup. For
more information about using Computer Setup, refer on this CD
to the Software Guide, “Computer Setup” chapter.
To set the notebook to start up with the external keypad enabled:
1. Turn on or restart the notebook.
2. Press
F10 while the F10 = ROM Based Setup message is
displayed in the lower left corner of the screen.
To change the language, press F2.
For navigation instructions, press
F1.
3. Select Advanced > Device Options, then press enter.
4. Select or clear the Num Lock State at Boot field:
To start up an external keypad with num lock mode turned
on, select the field.
To start up an external keypad with num lock mode turned
off, clear the field.
User Guide 2-13