User Guide for iPAQ Connection Point CP-2W

78
I
PAQ C
ONNECTION
P
OINT
CP-2W
Cannot access
access
Internet
(external web
pages) on my
PC through the
Connection
Point CP-2W
(but
can
access the
configuration
pages).
Modem is not on. Turn on DSL or cable modem.
No valid IP
address on
Connection Point
CP-2W.
Go to Connection Point CP-2W
configuration pages. Click Renew
Internet IP under the
Current Internet
Status
section of the Basic Setup tab.
ISP service is
down.
Verify that DSL or cable modem is on and
working properly by checking the
modem’s LEDs. Consult modem
documentation or ISP for information
regarding modem status.
Previous MAC
address was not
released by cable
or DSL modem.
Reset the cable or DSL modem: unplug
power to modem for anywhere from
several minutes to several hours. Contact
ISP for more information.
Connection Point
CP-2W Internet
settings not
properly
configured.
ISP may require additional configuration
information: PPPoE account user name
and password, DNS, device name, or
MAC address. Contact ISP for specific
requirements and add them to your
configuration.
ISP requires MAC
address of device
connected to
Internet.
Found on System Information tab of
internal web page in the
Internet Status
section in field labeled
MAC Address .
Symptom Possible Cause Solution