Hardware Reference Guide Compaq Evo Desktop Family Small Form Factor Models Intel Celeron Versions

Hardware Upgrades
When replacing the hard drive, transfer the four screws from the old
drive to the new one. The screws take the place of drive rails.
If you have installed a hard drive that is not automatically recognized
by the computer, see Appendix B, “Hard Drive Installation
Guidelines.”
CAUTION: To prevent loss of work and damage to the computer or drive:
■
If you are inserting or removing a hard drive, turn off the computer. Do
not remove a hard drive while the computer is on or in standby mode.
■
Before handling a drive, ensure that you are discharged of static
electricity. While handling a drive, avoid touching the connector. For
more information about preventing electrostatic damage, see Appendix
E, “Electrostatic Discharge.”
■
Handle a drive carefully; do not drop it.
■
Do not use excessive force when inserting a drive.
■
Avoid exposing a hard drive to liquids, temperature extremes, or products
that have magnetic fields such as monitors or speakers.
■
If a drive must be mailed, place the drive in a bubble-pack mailer or other
suitable protective packaging and label the package “Fragile: Handle
With Care.”
Removing a CD-ROM Drive
CAUTION: All removable media should be taken out of the drives
before removing the drive from the computer.
1. If you have locked the Smart Cover Lock, use Computer Setup
to unlock it.
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet.
4. Remove the computer cover.
5. Rotate the drive cage to the upright position.
6. Rotate the power supply to the upright position.
2-18 Hardware Reference Guide