Evo Desktop Family, Small Form Factor Models, Intel Pentium 4 Version Hardware Reference Guide

Hardware Reference Guide B–7
Hard Drive Installation Guidelines
A menu displays with the following options:
■
Configure/View Host Adapter Settings
❏
SCSI Bus Interface Definitions
◆
Host Adapter SCSI ID
◆
SCSI Parity Checking
◆
Host Adapter SCSI Termination
❏
Additional Options
◆
Boot Device Options
◆
SCSI Device Configuration
◆
Advanced Configuration Options
■
SCSI Disk Utilities
Lists all SCSI devices and SCSI ID numbers
✎
For additional information about configuring POST message
display status, refer to the Computer Setup Guide on the Reference
Library CD.
Choosing the Quiet Drive Options
✎
The Quiet Drive is an optional feature and may or may not be
included on your computer.
If this computer is equipped with a Quiet Drive or, if you choose to
install a Quiet Drive, you may configure the drive to operate in Quiet
mode or Performance mode (default). When idle, the Quiet Drive
produces an acoustic noise level approximately 4 decibels (dB) lower
than that of a standard drive. When configured to operate in Quiet
mode, the Quiet Drive reads and writes data at an acoustic noise level
approximately 7 dB lower than that of a standard drive.
✎
When configured to operate in Quiet mode, the drive will not operate
at maximum performance levels. For maximum drive performance,
set the drive to operate in Performance mode.
243849g1.book Page 7 Wednesday, June 6, 2001 6:05 PM