Evo Desktop Family, Small Form Factor Models, Intel Pentium 4 Version Hardware Reference Guide

Hardware Reference Guide 2–21

Hardware Upgrades

Installing an Optional CD-ROM or DVD-ROM Drive

To install an optional CD-ROM or DVD-ROM drive:

1. Remove the CD-ROM drive if present.

2. Install two guide screws on each side of the drive.

CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws.

Longer screws can damage the internal components of the drive.

Installing Guide Screws in the CD-ROM or DVD-ROM Drive

3. Position the guide screws on the drive into the J-slots in the drive

bay. Slide the drive toward the front of the computer.

✎

Ensure that the spring-loaded locking lever properly secures the drive.

243849g1.book Page 21 Wednesday, June 6, 2001 6:05 PM