Hardware Reference Guide Compaq Evo Desktop Family Small Form Factor Models Intel Celeron Versions

Hardware Upgrades
Removing the Computer Cover
To install optional equipment, you must remove the computer cover
to gain access to internal components. The quick release cover
latches located on the sides of the computer allow easy removal of
the computer cover without the use of tools. To remove the cover,
follow these steps:
1. If you have locked the Smart Cover Lock, see the previous
section on Smart Cover Lock or use Computer Setup to unlock
it.
2. Turn off the computer and any external devices.
3. Disconnect the power cord from the power outlet, and disconnect
any external devices.
WARNING: Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected from the
electrical outlet.
4. Press in the button on each side of the front bezel to release the
quick release cover latches.
Hardware Reference Guide 2-5