Specifications
CAUTION: Static electricity can damage the electronic components of the computer or optional
equipment. Before beginning these procedures, ensure that you are discharged of static electricity by
briefly touching a grounded metal object.
1. Prepare the computer for disassembly (Preparation for Disassembly on page 30).
2. Remove the computer access panel (
Computer Access Panel on page 38).
3. Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
4. Insert the new battery and position the clip back in place.
Figure 6-38 Removing the battery
5. After the battery has been replaced, reverse the disassembly procedure.
6. Plug in the computer and turn on power to the computer.
7. Reset the date and time, your passwords, and any special system setups, using Computer
Setup. Refer to the Computer Setup (F10) Utility Guide.
64 Chapter 6 Removal and Replacement Procedures