Reference Guide

Heading Option Description

IDE Channel 0 Master This allows you to detect the device.

IDE Channel 1 Master Also it allows you to set the IDE deviceto:

• None

• Auto(default)

• Manual

Access Mode This allows you to set the access mode to:

• CHS

• LBA

• Large

• Auto(Default)

Also,this allows you to see the Hard disk

information. (view only):

• Capacity

• Cylinder

• Head

• Precomp

• Landing Zone

• Sector

Halt On Allows you to set at:

• All errors

• No errors

• All,but Keyboard

SATA Controller This allows you to set for:

• Disabled

• Enabled (default)

LEGACY Mode support This allows you to set for:

• Enabled (default)

• Disabled

Computer Setup (F10) Utility Guide www.hp.com/in 7-5

Computer Setup (F10) Utility

Computer Setup (Continued)

Support for specific Computer Setup options may vary depending on the hardware configuration