Deskpro Personal Computers Service Reference Guide

Deskpro Service Reference Guide
2-5
Computer Setup Menu
Continued
Heading Option Description
Advanced
*
Power-On Self Test Allows you to set POST mode (QuickBoot or FullBoot) and
enables/disables POST messages.
Onboard Devices Allows you to set resources for onboard system devices (serial
port, parallel port, etc.).
PCI Devices Lists currently installed PCI devices and their IRQ settings.
Allows you to reconfigure IRQ settings for these devices or to
disable them entirely.
ISA PnP Devices Lists current settings of Plug and Play (PnP) devices.
Enables or disables Plug and Play devices.
Note: Appears only when Plug and Play devices are currently
installed.
Bus Options Enables/disables PCI bus mastering, PCI reset on warm boot,
and PCI VGA palette snooping.
Allows you to set ISA back-to-back I/O (fast/legacy) delay and
bus priority (ISA/PCI).
Device Options Allows you to set printer mode (flexible/standard), NumLock
state at power-on, and Erase-Eaze Keyboard support.
PCI VGA Configuration Allows users to specify which VGA controller will be the “boot”
or primary VGA controller.
Appears only if there are multiple PCI video adapters in the
system.
*
These options should be used by advanced users only.