User guide

Front USB Panel
1. Prepare the computer for disassembly (Preparation for Disassembly on page 61).
2. Remove the computer access panel (
Computer Access Panel on page 66).
3. Remove the front bezel (
Front Bezel on page 67).
4. Disconnect the front I/O cable from the blue system board connector (P6) and the USB cable from
the yellow system board connector (FRONT_USB, P24).
5. Stand the unit upright.
6. Remove the silver T15 screw that secures the panel to the chassis.
7. Pull the panel away from the unit while threading the wires between the drive cage and the baffle
and through the hole in the front of the chassis.
To reinstall the panel, reverse the removal procedure.
Front USB Panel 97