Hardware reference guide

Hardware Upgrades
Removing the Computer Access Panel and
Front Bezel
To remove the computer access panel:
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the
lock.
2. Turn off the computer properly through the operating system, then turn off any
external devices.
3. Disconnect the power cord from the power outlet and the computer, and
disconnect any external devices.
CAUTION: Before removing the computer access panel, ensure that the computer is
turned off and that the power cord is disconnected from the electrical outlet.
4. On the top of the computer, locate the cover latch. Pull up and hold the latch
1
to release the computer access panel.
5. Slide the computer access panel back
2
about 0.5 inch (1.25 cm), then lift the
access panel up and off the chassis.
Removing the Computer Access Panel
Hardware Reference Guide 2-5