- Hewlett-Packard Plumbing Product User Manual

Combi HP thermostatic mixer shower

Height of

showerhead

and shower

to suit user’s

requirement.

Shower can be

mounted either side

of the riser rail

T00225

Before starting the installation, make sure all the

openings on the valve are carefully covered to

prevent ingress of any debris etc.

Note: It is not necessary to remove the control

knobs at any stage.

SITING OF THE SHOWER

W-008-A

WARNING!

The shower must not be positioned

where it will be subjected to freezing

conditions.

Refer to fig.6 for correct siting of the shower.

Position the shower and showerhead on the wall

so that all controls can be comfortably reached

while using the shower. The showerhead and

riser rail can be positioned either side of the

shower.

Note: Pipe entry for both surface-mounted and

flush-fitted valves can be from the top, bottom

or rear.

The hot entry port is on the left-hand side of the

valve and is marked on the valve with a letter ‘H’

(fig.7).

PREPARING THE MIXER VALVE

Fig.6 diagrammatic view (not to scale)

T00226

Fig.7

Surface-mounted illustrated