User's Manual

ENWW Send to Fax 45

Callout Area on the screen Information or capability that the area provides

EWS tabs and menus For more information, see “Navigating through the HP Embedded Web Server” on page 5.

Help Click to open a help file that contains information about the screens on the Digital

Sending tab.

Send Faxes directly from the device’s internal modem Send faxes directly from the product. When

this option is selected, you must select or

type the following information:

● The country/region

● The company name

● The phone number to which the internal

modem of the product is connected

● If applicable, any prefix number that your

phone system requires

via the Digital Sending service Send faxes by using the digital sending

software service (the settings on this

screen).

Device Modem Settings Type these settings if directly from the device’s internal modem is selected from the

Send Faxes list.

Advanced Click this button to open a new screen where you can set advanced product modem

settings, such as modem and ringer volume, and send and receive settings. From this

screen, you can also print a fax activity log and gain access to security and diagnostics

settings. For more information, see “Advanced Fax Settings” on page 46.

Notification Set the notification options, such as whether a notification will be sent, whether the

notification will be printed, or whether the sender should receive a notification report.

Select the language for the notification report. The languages that are available are the

same languages that are available on the Language screen of the Settings tab.

Quality Select the resolution for the outgoing faxes.

Billing Code Type the billing code, if applicable. If you want to, you can select the Editable by User

check box to allow the user to change the code. Use the Minimum Length field to set the

minimum length of the billing code. The billing code can be a value between 1 and 16.