HP Designjet T2300 eMFP Series - Using Your Product

9 Copying

Before starting to copy, see Paper types suitable for scanning on page 80.

1. Load the sheet with the printed side facing upwards (you can also load the sheet before step 1, if

you prefer). Align the center of the sheet approximately with the center of the scanner. Use the

standard size markings to help you.

NOTE: The scanner can scan a maximum length of 2378 mm (93.62 in). A longer sheet than

this can be moved through the scanner, but only the first 2378 mm (93.62 in) will be scanned. An

alert is displayed if the maximum length is exceeded.

2. Push the sheet into the insertion slot until you feel it contact the rollers. The scanner will

automatically grab the sheet and move it into position for scanning. You can press

to eject the

sheet if you feel that it has loaded badly and you want to try again.

At the front panel, go to the home screen and press

4. Some of the default copy settings are displayed. Press Settings to see the complete list of settings,

and check in particular that the Paper type setting corresponds to the paper type that you intend

to scan.

●

Size allows you to resize the print in two different ways: to a percentage of its original size,

or to fit a particular paper size. The default is 100% (its original size).

●

Copy quality allows you to set the print quality to Best, Normal or Fast.

●

Copy color allows you to choose color or grayscale printing.

●

Roll allows you to specify printing on roll 1 or roll 2, or you can choose Save paper,

which automatically chooses the narrowest roll on which the print will fit.

ENWW 83