HP Designjet T2300 eMFP Series - Using Your Product

Load your sheet aligned with the load line and insert until the paper will not continue; with thicker
sheets, you feel resistance.
WARNING! Do not push your fingers inside the printer's paper path.
6. Press OK on the front panel to feed the paper into the printer. Guide the sheet into the printer; this
is especially important with thicker papers.
7. The printer checks the alignment and measures the sheet.
NOTE: Depending on the length of the sheet, it feeds out the front of the printer.
8. If the length of the sheet is more than 600 mm (23 in), the front panel asks you to check that the
rear of the sheet is hanging backwards over the roll cover (and not forwards over the scanner).
9. If the sheet is not correctly aligned, you may be asked to correct the alignment. Please follow the
instructions on the front-panel display.
NOTE: If you have an unexpected problem at any stage of the paper loading process, see The paper
cannot be loaded successfully on page 173.
Unload a single sheet
To unload a single sheet after printing, you can simply pull the sheet free from the front of the printer.
To unload a sheet without printing, go to the front panel and press
then the roll 1 icon, then
Unload > Unload sheet.
Alternatively, press
, then , then Paper > Paper unload > Unload sheet.
56 Chapter 5 Printer paper handling ENWW