HP Designjet T2300 eMFP Series - Using Your Product

7. Make sure that the product is turned on and connected to the computer with a certified USB cable.

NOTE: The use of non-certified USB cables can lead to connectivity problems. Only cables

certified by the USB Implementor's Forum (

http://www.usb.org/) should be used with this product.

8. Shortly afterwards, a print queue is created automatically for your printer.

Sharing the product

If your computer is connected to a network, you can make your directly connected product available to

other computers on the same network.

1. Double-click the System Preferences icon on the Dock menu bar on your desktop.

2. Under Mac OS X 10.4, enable printer sharing by going to Sharing > Services > Printer

Sharing.

Under later versions of Mac OS X, go to Sharing, select Printer Sharing, and then check the

printer(s) that you want to share.

3. Your product now automatically appears in the list of shared printers displayed by any other

computer running Mac OS and connected to your local network.

Please bear in mind the following considerations.

●

Any other users wishing to share your product must install the printer software on their own

computers.

●

Anyone sharing your directly connected product will be able to send print jobs, but will not be

able to receive information from the product—which affects alerts, status reports, paper

management, administration and troubleshooting.

●

The PCL3GUI (raster) driver can drive a shared printer between different versions of Mac OS, but

the PostScript driver does not support printer sharing between Mac OS X 10.4 and Mac OS X

10.5 or 10.6. It does support printer sharing between Mac OS X 10.5 and 10.6.

●

You may find that sharing your directly connected product with other users will slow down your

computer unacceptably.

TIP: The best way to share the product over a network is to connect the product not to any computer,

but to the network. See

Connect a computer to the product by network (Mac OS) on page 20.

Uninstall the printer software (Mac OS)

1. Insert the HP Start-up Kit DVD into your DVD drive.

ENWW

Uninstall the printer software (Mac OS)