HP Designjet T2300 eMFP Series - Using Your Product

Connect a computer to the product by USB cable
(Mac OS)
You can connect your product directly to a computer without going through a network, by using the
product's built-in Hi-Speed USB device port.
The following instructions apply if you intend to print from software applications using a printer driver.
If you intend to print only with the Embedded Web Server, you do not need to install the printer
software, and you can ignore these instructions: see
Printing on page 63.
1. Make sure the product is either turned off, or disconnected from the computer.
2. Insert the HP Start-up Kit DVD into your DVD drive.
3. Open the DVD icon on your desktop.
4. Open the Mac OS X HP Designjet Installer.
5. Follow the instructions on your screen.
6. The printer software is installed, including the printer driver and the HP Utility.
24 Chapter 2 Installing the software ENWW