HP Designjet T2300 eMFP Series - Using Your Product

Uninstall the printer software (Windows)
1. Insert the HP Start-up Kit DVD into your DVD drive. If the DVD does not start automatically, run the
setup.exe program in the root folder of the DVD.
2. Press the Software Installation button.
3. Press the Modify Installation button, and follow the instructions on your screen to uninstall the
printer software.
Connect a computer to the product by network (Mac
OS)
You can connect your product to a network under Mac OS X by using the following methods:
●
Bonjour
●
TCP/IP
NOTE: The product does not support AppleTalk.
Before you begin, check your equipment:
●
The product should be set up and on.
●
The Ethernet switch or router should be on and functioning correctly.
●
All computers on the network should be on and connected to the network.
●
The product should be connected to the network (see
Connect the product to your network
on page 16).
Now you can proceed to install the printer software and connect to your product.
Bonjour connection
1.
Go to the front panel and press
, then , then . Note the mDNS service name of
your product.
2. Insert the HP Start-up Kit DVD into your DVD drive.
20 Chapter 2 Installing the software ENWW