HP Designjet T2300 eMFP Series - Using Your Product

The Connectivity Wizard performs a series of tests automatically. You can also choose to perform
individual tests. From the front panel, press
, then , then Connectivity > Diagnostics &
troubleshooting > Diagnostics & troubleshooting. The following options are available:
●
All tests
●
Network connectivity test: check the product's connection to the local area network.
●
Internet connectivity test: check the product's connection to the Internet.
●
HP Designjet ePrint & Share test: check the product's connection to HP Designjet ePrint &
Share.
●
HP ePrint Center test: check the product's connection to the HP ePrint Center.
●
Firmware update test: check the product's connection to HP's firmware update servers.
If any test fails, the wizard describes the problem and recommends how to solve it. You can modify
settings and rerun the test, unless you are using the Embedded Web Server or the settings are
protected.
Web Services issues
For any issues with HP ePrint, please refer to the HP ePrint Center.
For any issues with HP Designjet ePrint & Share, please refer to the HP Designjet ePrint & Share
website.
Automatic file system check
When you turn on the product, you will occasionally see a front panel display similar to the one shown
below.
A file system check is taking place; it can take up to 40 minutes. Please wait until it finishes.
CAUTION: If you turn the product off before the file system check has finished, the file system could
be seriously damaged, making the product's hard disk unusable. In any case, the file system check will
restart from the beginning whenever you turn the product on again.
A file system check is scheduled every 90 days, in order to maintain the hard disk's file system
integrity.
ENWW
Web Services issues
201